TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm.
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.04 – €0.05 net (excluding VAT)
For file: TinTin-Rocket-Antenna-Dark_0.4n_0.2mm_PETG_MINIIS_2m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.05 excluding VAT (range midpoint).
- Weight reported by the author
- 1 g
- Print time reported by the author
- 1.8 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm.
- Rating
- 5 / 5
- Likes
- 30
- Downloads
- 143
- Makes
- 1
- Views
- 1,278
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
TinTin Moon Rocket - Destination Moon | Explorers On The Moon - Height: 49 cm.
A couple of years ago I bought the comic book and scanned the page with the blue print of the rocket. Imported the scan into the modeler and used it as a background to define the exact contours and lines of the rocket. The total size of the rocket is dictated by the height of the tallest part (being the stand at 175.8 mm) that can be printed comfortably on a Prusa Mini.
Printing
- Fill density: 15%.
- Fill pattern: Gyroid.
- Some parts require support and a brim.
- The three top and bottom parts of the stand are grouped into one print. Consider printing one at a time for better appearances.
Assembling
- See pictures (intended to be self explaining).
- Screw the bottom part into the top part of a stand.
- No glue required as all parts are created with a tight fit.
- Put the circle of the antenna on a piece of filament for the best appearance.
Optional
- There is a triangular space embedded throughout the model for attaching it to a stick or whatever you prefer.