Rotating heart (single axis gyroscope)
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€2.18 – €2.66 net (excluding VAT)
For file: PETG at .2mm layer height / rotatingheart1-v2_02mm_pet_mk3s_2h43m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.42 excluding VAT (range midpoint).
- Weight reported by the author
- 26 g
- Print time reported by the author
- 2.71 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple multi-piece print-in-place heart that rotates within itself.
- Rating
- 5 / 5
- Likes
- 50
- Downloads
- 577
- Makes
- 7
- Views
- 2,315
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial
A simple multi-piece print-in-place heart that rotates within itself. Two versions included, one with an embossed name, and a blank file too.
Print instructions
Highly recommended to print this with a raft as any elephants foot on the print bed will cause the rotating parts to bind and prevent it from turning. The clearance between parts is about 0.4mm, so if your printer is well tuned you could theoretically scale this down to 50% and it should still work, but it hasn't been tested. Test print was done at 100% scale.