1 / 10
Cradle for AutoZero Touch Plate (Sienci Labs) — image 1
1 / 10

Cradle for AutoZero Touch Plate (Sienci Labs)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Post a make! Leave a comment! Includes slots for two spare ER-16 collets, and two backing options

Rating
5 / 5
Likes
10
Downloads
140
Makes
2
Views
431
Reviews
2

Updated at source:

Model information

Category
Organizers
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

We needed a handy place to keep the AutoZero Touch Plate when not in use, as well as the two extra ER16 collets that came with the AltMill, so we fashioned this holder.

It's designed to fit onto the AltMill table, but we also made a variant that can be screwed to a wooden backing. 

We spent many hours perfecting the design once it was finished. 

For instance, when placing the auto-zero touch plate in the cradle, sometimes a collet would pop out, so we had to come up with a retention method to prevent that from happening. 

Another thing that happened is every once in a while, when lifting the AutoZero Touch Plate out of the cradle, sometimes the cradle would slide up, so we created a retention method for preventing that from happening.

Suggested settings: ("engineering" profiles if your slicer has that) - slow = accurate

Nozzle: 0.4mm or 0.6mm

Layer height: 0.1mm - 0.15mm

Material: Any (the stronger, the better)

Infill: Cubic (20-40%)

Walls: 3+

Print speed: 30mm/s

 

If attaching to AltMill table, use any spare M6 t-nuts (Self-Align Ball Nut), and an M6x16 button-head bolt (should have two of each left over from the build). 

Tags