SDL Remote WX Solar Weather Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 47
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
** 9-Mar-19 Have tested with a 6000mAh battery and works fine. Removed the thread for the Thunderboard hole and changed it to support a UV Sensor stalk. I have removed the Thunderboard from the Remote unit back to the base unit.
18-Feb-19 I changed the depth of the case from 2 x 29mm to 2 x 34mm. This should reduce the issue of potentially very tight fit for several battery sizes. In addition I created a deeper thread section for the Thunderboard pole.
This is a Case for a remote monitoring Station based on the SwitchDocLabs WeatherStations. This case supports the Solar Panel, SunAirPlus, and the Grove Pro Mini with WeatherRack and Lora Module.
The Case is a remix of the excellent Customizable Rugged Waterproof Box from ZX82net.
The licence is inherited from zx82net licence. (I usually don't worry about non-commercial)
I have included the clips and latches I use from the original project, however there are some other options in the original project by zx82net.
This also uses the SwitchDocLabs Solar Panel Holder from the SDL site, although I have modified it to allow for a self tapper screw if you use the WXSolarFrame.
Category: Electronics