Condom dropper (dispenser) for under the desk – Halloween edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Box for storing condoms with a quick way to get them out 1-by-1 without stopping the fun
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 53
- Makes
- 0
- Views
- 709
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bedroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
It can store around 15 condoms. The opening is 66x5mm, and the condom package that it's designed for is 64x64mm. The bottom has a ramp that will make taking condoms out easier. As the box empties, it might get a bit trickier to pull condoms out, because there's no weight to push down on them. In that case just nudge the center of the condom up and then start pulling it out.
There are 2 versions – with 8 and 12 magnets that'll hold the box in place (more magnets = stronger hold). NOTE: My magnets are 2.7mm instead of 3mm, and 1.7mm instead of 2mm. Hole depths are for those sizes.
You'll need:
- 8x 6x3mm magnets
- 4x 4x2mm magnets (Optional)
- 4x 6x2mm magnets (for 12 magnet version)
- Glue for magnets
Smaller optional magnets will hold the lid in place, as it will get looser over time from the friction. I printed the version without those little magnets, and after a year of use it's definitely much looser, but it won't come off while pulling condoms out.
For the 8 magnet version, each hole is for one 6x3mm magnet. For the 12 magnet version, the holes are deeper, having extra room for placing additional 6x2mm magnets on top of the ones in the mount. I used the 12 magnet version.
The mount is designed for IKEA'a UPPSPELL standing desk. I included the STEP file for the mount as I'm assuming you might want to mount it somewhere else. For the original mount you'll need:
- 2x M3 x 10mm SHCS screws
- 2x M3x4x5mm heatset inserts
You can also just glue the original mount to whatever vertical surface you like.