Whipper hex bit conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Legendary "Plastimat Liberec 1 liter hand whipper" can be easily converted to be hex bit driven (screwdriver end)
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Share Alike
CS:
Ručka na klasickém šlehači na vajíčka zn. Plastimat Liberec je šroubovací a dá se snadno vyměnit za ¼" nástavec do aku-šroubováku, já používám Bosch IXO, ale nátavec sedne do každého šroubováku. Inspirace přišla, když jsem viděl tohle: https://www.bosch-diy.com/cz/cs/p/ixo-collection-nastavec-pro-mleti-ko%C5%99eni-1600a001ye Vytištěno z černého ASA Průšamentu, 260C, 0.12mm, 3 obvody. Myslím, že PETG by měl snad stačit, PLA se pravděpodobně rychle zlomí, protože bit je namáhán a nedržíte-li šroubovák kolmo, tak taky malinko ohýbán. Pro zajímavost: šlehač lze pořád pořídit i nový: https://www.oriondomacipotreby.cz/kuchynsky-rucni-slehac-dela-1-l-130602
EN:
Unless you live in Czechia or Slovakia, you are not likely to get your hands on the legendary Plastimat Liberec hand kitchen whipper. If you do, however, the handle can be easily unscrewed and the hereby presented conversion adapter then transforms the originally manual whipper to an electric screwdriver accessory. I use Bosch IXO screwdriver, but the ¼" bits are universal. I was inspired after seeing this: https://www.bosch-diy.com/gb/en/p/ixo-collection-spice-mill-adapter-1600a001ye Printed with black ASA Průšament, 260C, 0.12mm, 3 perimeters. I think PETG should do, but PLA is likely to crack soon, as the bit part is pretty stressed and even being bent, if you don't hold the screwdriver straight. The whipper is still available for purchase as new: https://www.oriondomacipotreby.cz/kuchynsky-rucni-slehac-dela-1-l-130602