1 / 6
Syride NavXL twist lock adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Twist lock adapter for Syride NavXL vario
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 125
- Makes
- 0
- Views
- 549
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
This is the replacement for out-of-the box velcro strips on Syride NavXL vario for easy mounting the vario to the harness or wing risers
Print instructions
- ASA
- 0.6mm nozzle, 0.2 layer height
- 3 perimeters
- 100% infill
Additional hardware
- 2x Tappex Microbarb M3 heat insert
- 2x M3x10 or M3x8 flat head screws depending on thickness of your riser / harness strips
- Safety cord extension (any synthetic cord can be used) - length is dependent on the place where are you going to mount the vario
Base plate is mounted using Syride original screws holding the velcro strips