1 / 5
Rogue 6: UNW  R6 248 shroud — image 1
1 / 5

Rogue 6: UNW R6 248 shroud

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

extra shroud option

Rating
0 / 5
Likes
4
Downloads
25
Makes
0
Views
122
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

02-06-2025

UNW-T6 outer barrel options added

---

this a special made shroud that will work for the Rogue 6 airsoft GBBR. it uses it own outer barrel system.

like other UNW 248 shrouds this made for a 248mm outer barrel but if you want longer barrels could be used 

use the R6 model for airsoft / gelsoft

when the M2 front is used then you might want to use the full length outer barrel
 

-
9 users note: this for the metric version only at the moment

---


installation:
it is show in the images. 
the M4 metal threaded rods will need the size of.
1x 402mm long (measured from the inside of the 2 nuts on the back!)
ad + 7mm to the top rod when used with the collapsible stock P9/6 end cap


2x 226mm long (measured from the inside of the 2 nuts on the back!)

---

material needed:
1x torx flat head screw countersunk m3 10mm long bolt

1x torx flat head screw countersunk m3 25mm long bolt

for Outer barrel

1x M3 bolt that is 18mm up to 25mm

---------

print settings
fallow the PDF for print settings

my print orientations at not correct see the how to print manual for this and notes on supports

Tags