1 / 7
Tesa tape dispenser roller / cylinder spare part - simple design, prints fast
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare part for Tesa tape dispenser (see first image).
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 106
- Makes
- 0
- Views
- 329
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
Spare part for Tesa tape dispenser (see first image).
Features:
- Compatible with 26mm inner diameter tape roles. Is flexible enough to allow for slight variances in diameter.
- One side of the roller is tapered for easier roll changes.
- Uses very little material and prints fast.
My print settings:
- Prusa Mini
- PrusaSlicer using the standard Prusa Mini "Draft" profile
- 0.4mm nozzle
- 0.25m layer height
- 0% infill
- PLA
Roller with stem all-in-one (all_in_one.stl)
- Needs supports
---
You can alternatively print the roller and stem individually.
Roller:
- 1 perimeter only
Stem (regular version, stem.stl)
- 2 perimeters
Please note, you only need to print one of the two stem versions.
Stem (vase mode, stem_vase.stl)
- Print in vase mode without solid top and bottom layers.
- Pros compared to regular vesion:
- Prints faster
- Uses less material
- Note: You can print the regular stem.stlin vase mode for a slightly looser fit.
---
Remix however you like, with or without attribution.
Category: Replacement Parts