1 / 2
hooks for the Shaper Origin Workstation's support bar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
- Print the two parts
- attach the top one with one screw first
- Using a square to ensure positioning, put the second screw in.
- Holding the bottom piece in place, mark the top edge with a pencil.
- repeat 2 & 3 for the bottom part.
- Bring the bottom part of the support bar next to the top vertical edge to align witht the key hole
- Slide it in down ensure proper alignement at the top