RF Choke/Balun FT114-31 Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple enclosure to hold an RF choke or a balun based upon an FT114-31 toroid
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 34
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple enclosure to hold an RF choke or balun based upon a Fair-Rite FT114-31 toroid 2631801202. Note that FT114-31 toroids have the same diameter as a FT114-43 or FT114-61 toroid, but the height is larger at 13.85mm (the toroids normally sold as FT114-43 and FT114-61 are 7.5mm tall).
There is provision for a standard 4 hole BNC connector at both ends. The lid can be glued on once complete. The photos show a choke example for 28MHz wound with 10 turns RG316 which I made for a coaxial vertical dipole.
I printed mine in PLA with a 0.6mm nozzle at 0.3mm layer height. This is a for portable equipment so PLA will be fine.
Update Jan 2025 - look at my remix to which is easier to build.