Traxxas TRX-4 body post adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transferred from my Thingiverse account
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 19
- Makes
- 0
- Views
- 249
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
I made this body post adapter in order to use an old HPI Jeep Wrangler body which I had from my old E-Maxx. It utilises a rear body post from the old style E-Maxx/ T-maxx trucks which had the round body posts, not the later type with the square posts.
As far as I know, HPI no longer makes this Jeep body, however the body post adapter may still be useful when using various other bodies.
Please note, I designed this to suit my TRX-4 which has been upgraded with aluminium shock towers. I don't know if it will fit with the stock plastic ones or not.
Requires (2) M3x10mm countersunk screws, and (2) M3x20mm button head or socket head screws.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.2
Infill:
20
Notes:
Printed upside down so supports aren't needed.
I recommend cleaning out the screw holes with a drill bit:
-The holes that need the screws threaded into them need to be drilled at 2.5mm (the 2 at the top, and the holes behind the shock towers.
-The holes where the screws pass through them need to be drilled at 3mm (the ones at the base, and the ones at the front of the shock towers).
Category: R/C Vehicles