R/C crawler 2.2 beadlock wheels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transferred from my Thingiverse account
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 25
- Makes
- 0
- Views
- 171
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
R/C crawler 2.2 beadlock wheels.
Designed to work with stock Axial Wraith hubs. (May also work with Vanquish hubs??)
5 part design which can be printed without supports.
2 outer beadlock ring face styles; flat or strengthened. 4 different options; Plain (no markings), and foam density markings Soft/ Medium/ Firm (marked S/M/F). I use the faces with marking for the inner face, and the plain ones for the outer face. The foam density markings are handy for anyone who uses different foams between front and rear to allow for easy identification when all wheels are removed during maintenance etc.
Overall weight is around 65g per wheel including screws at approx 40% infill and 3 perimeters
Requires M3 screws for the beadlock ring faces, and M2.5 screws for the hubs.
***I have had limited use with these wheels, but so far I haven't had any issues (using Voodoo pins & Crawler Innovations DD foams on an XR10). Note; The DD foams were trimmed out to allow the rim to fit within the foam (Hard to explain, and I forgot to take a photo)
Feel free to leave comments/ feedback.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
No
0.2
Infill:
40%
Category: R/C Vehicles