1 / 4
Wheel centre cap socket for Traction Hobby Cragsman 1/8 scale crawler
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Transferred from my Thingiverse account
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 10
- Makes
- 0
- Views
- 159
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
A simple socket to remove and install the wheel centre caps on a Traction Hobby Cragsman. Easily remove the centre caps by hand. Requires no additional tools. Printed upright with no supports or raft/brim. -If the tool is firm on the centre caps, the inner edge of the base layer may need a slight cleanup with a hobby knife.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
No
Supports:
No
0.15
Infill:
10
You may have to chamfer the edge of the first layer with a hobby knife post print so the centre cap doesn't get stuck inside the socket.
Category: R/C Vehicles