1 / 2
Honda Civic EG, Del Sol, Upper Ball Joint Boot — image 1
1 / 2

Honda Civic EG, Del Sol, Upper Ball Joint Boot

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a model of the upper control arm ball joint boot for the Honda civic EG and Del Sol.

Rating
0 / 5
Likes
12
Downloads
48
Makes
0
Views
337
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a model of the upper control arm ball joint boot for the Honda civic EG and Del Sol. I modeled the walls to be 1mm thick and it seems to come out perfect for a boot, if anyone installs it let me know how it holds up.

I modeled a little indention on the bottom of the boot so you can use a zip tie or metal clip to hold it to the metal stud so grease stays in the boot. Oh also, this boot might fit the lower ball joint too but I'm not 100% sure, I know they are similar though.

NOTE: You will obviously need to print in TPU or some other flexible filament since it's a boot, plastic won't work on this part.

Category: 3D Printing

 

If you would like to leave a small tip for my hard work you can do so here :D https://www.paypal.com/ncp/payment/Y5DRF7PN8S5AJ

Tags