1 / 1
Diaphragm spacer ring for Scubapro G250 regulator — image 1

Diaphragm spacer ring for Scubapro G250 regulator

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Diaphragm spacer ring for Scubapro G250 regulator

Rating
0 / 5
Likes
4
Downloads
30
Makes
0
Views
194
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This replaces the diaphragm spacer ring (11.190.117) on a Scubapro G250 regulator.

The little tabs on these rings tend to break after a few decades, who can blame them.

The old ones have a thickness of 1.4mm while the new spare parts SP ships are 1.8mm for some reason. So i've included both.  
Smoothing the top layer with a fine sandpaper (e.g. 1000 grit) after printing might be a good idea.

Printing instructions:

  • Use 0.1mm layer height or less
  • Use something like 8 top and bottom layers so the part is solid
  • Use a smooth print bed/plate
  • Use a material that can take the mechanical stress and has the required chemical resistance and flexibility. I recommend PETG.
  • Do not use PLA!

This is not an official spare part and is not ratified under the EN250 or any other standard. Use at your own risk!

Tags