Elevated tablet & laptop stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An elevated tablet and 2-in-1 laptop stand that lifts up your device by around 8.5 cm
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 13
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A tablet and 2-in-1 laptop stand to elevate the device by around 8.5cm. The grooves where the device sits are made extra wide and the supports extra tall to account for said laptops. Honeycomb walls make it look pretty.
No hardware for assembly required, just push the support on to the beams.
There are two version for this model:
2 Slot which is for devices at least 18cm wide
3 Slot which is for devices at least 21cm wide with an additional middle support for more strength (probably overkill)
2 Slot can be printed in one print while the 3 Slot has to be printed in two.
The included gcode uses the normal draft profile for the mk3s+ using a 0.4mm nozzle and PETG with 8% honeycomb infill, but you can use the .3mf files to slice it with your own settings. FreeCAD files are also available.