1 / 2

Typhur Sync Gold Dual Protective Sleeve

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Various sleevesfor your wireless thermometer.

Updated at source: Jun 9, 2026

Model information

I've printed the full “cutouts” version in 87A TPU, and while it fit perfectly… there so much stringing. And the bridging was entertaining.

All-in-all…. print any of the variants with big holes in TPU at your own risk. I have yet to print in PLA/PETG, but I imagine it'll turn out fine.

The “solid” variants (notably don't have the kickstand hole) have top-side notches to allow for grabbing the device to remove it from the case.

I've made a few variants, some more of a protective case for storage, and others so you can still see the display.

cutouts – All features cutout, so it's more of a protective shell.
- if you print in TPU, hopefully you have better luck with stringing than me!
nocut – Protective shell, but leaving the holes minimal to reduce stringing. You'll need to manually cut the holes.
solid – Solid sleeve, with just the USB port accessible.
solid screen nocut – Solid sleeve, with the screen not cut through.
- Manually cut the hole.
- Or, print with translucent PLA/PETG/TPU, to still see the screen!
solid screen cutout – Solid sleeve, with the screen fully cut out.