Onefinity drag chain tube clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Liquid coolant drag chain clip for Onefinity CNC
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 70
- Makes
- 0
- Views
- 264
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
This is an extension clip to attach the liquid coolant tubes to the onefinity CNC drag chain. It has a hole (badly positioned at the moment) to disconnect the drag chain.
This clip can slide on top of the existing drag chain bracket and be held in place.
It should be printed as shown in the .3mf file. In case some printers suffer from bed adhesion issues, I have manually created a brim strategically placed around the object to avoid interference when it slides onto the drag chain.
I have included the step file in case anyone wants to make changes. Good luck!
I typically print it with PLA and 0.2mm layer height at the fastest possible setting with a 0.4mm nozzle. Other setups should work just fine, within reason.