Under-desk drawer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple drawer mounted on two rails (multiple dimensions)
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 64
- Makes
- 0
- Views
- 417
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This drawer is designed to be mounted on rails (you will need to print two rails). Multiple drawers can be installed side by side, as the rails are double-sided. To mount two drawers, you will need three rails; for four drawers, you will need five rails.
Please ensure that you do not mix drawers of different lengths; use only rails that correspond to the length of the drawer. Additionally, you will need 3-5 small screws to secure each rail.
I printed the drawer at an angle (as shown in the photo), which required support. The support visible in the picture was inadequate, so I recommend using a more stable support structure. I opted for manually defined support to achieve better results. Alternatively, you can print the drawer in a bottom-up orientation, but be aware that extra support for the rails and post-processing may be necessary to ensure a smooth finish.