James Webb Space Telescope Mirror
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.72 – €0.88 net (excluding VAT)
For file: JamesWebbFrame_0.2mm_PLA_MINI_48m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.80 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 48 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This mirror mimics the look of the James Webb Space Telescope
- Rating
- 5 / 5
- Likes
- 77
- Downloads
- 146
- Makes
- 7
- Views
- 2,180
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
This mirror is meant to recreate the look of the James Webb Space Telescope mirror array. I picked up some gold mirrors on Amazon and designed frames to hold them each in place with a dot of glue. Each frame is keyed to slot into the next hexagon and is held together with a bit more glue. I ended up tacking the backside with hot glue for extra support as well. Seems a lot more sturdy after adding the hot glue.
If you had a larger printer you could print more of these connected with less glue required but this works well be for me and my Prusa Mini.
You'll need 18 of the JamesWebbMirror_TNH_Frame.stl and just one JamesWebbMirror_TNH_Solid.stl. The mirror is about 2'x2' assembled.
I printed my JamesWebbMirror_TNH_Solid.stl with the PrusaSlicer top layer settings set to “Concentric” which I think gave it a nicer look than your standard top layer.