1 / 1
[Hueforge] Nope Not Today
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This modell was for a friend he is very busy and with this sign he can say leave me alone :D
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 38
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
[Hueforge] Nope not today
Print at 100% infill with a layer height of 0.08 mm, with a base layer of 0.16 mm.
The model is 170 x 170 mm in size.
You may print at higher layer heights below the minimum depth of 0.48 mm.
The maximum depth is 2.2 mm, and the actual depth is 1.3 mm.
Filaments Used:
- PLA+ Sunlu Black Transmission Distance: 0.6
- PLA+ Sunlu WhiteTransmission Distance: 5
This print uses 2 unique filaments.
Swap Instructions:
- Start with Black.
- At layer #8 (0.72 mm), swap to Jade White for the rest of the print.
Projekt: Nope not today
Drucke mit 100 % Füllung und einer Schichthöhe von 0,08 mm, wobei die Basislage eine Schichthöhe von 0,16 mm hat.
Das Modell hat eine Größe von 170 x 170 mm.
Verwendete Filamente:
- PLA+ Sunlu Black: Übertragungsdistanz: 0,6
- PLA+ Sunlu White: Übertragungsdistanz: 5
Dieser Druck verwendet 2 unterschiedliche Filamente.
Wechselanweisungen:
- Beginne mit Schwarz.
- Wechsle bei Schicht #8 (0,72 mm) zu Jade Weiß für den Rest des Drucks.