GPIO Hackerboard holder with captured magnets
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.45 – €0.55 net (excluding VAT)
For file: GPIOholder_0.4n_0.2mm_PLA_MK4S_27m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.50 excluding VAT (range midpoint).
- Weight reported by the author
- 7 g
- Print time reported by the author
- 27.6 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
An open, snap-in holder for the Prusa GPIO Hackerboard. Captured magnets let it easily stick to a handy metal surface.
- Rating
- 5 / 5
- Likes
- 7
- Downloads
- 40
- Makes
- 4
- Views
- 287
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
The GPIO Hackerboard is a great addition but it doesn't come with any good options for placement or retention. Enter a low-profile, fast-printing holder that sticks anywhere a magnet will. The cutout on the bottom should prevent interference with the board's headers, or allow access from the underside if you need that for some reason.
The board is held in place by a friction fit on the screw holes: the posts are very slightly oversized and should snap into place.
This print requires four round 6x2mm neodymium magnets, although you could probably get away with two (on opposite corners). A pause to add the captured magnets is included in the 3mf; if you're printing from the STL, add a pause at the top of the magnet holes (layer 13 if you're printing at 0.2). Insert the magnets, then continue printing.