Handle for K&M Music Stand 11940
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Handle for easy carrying the orchestral music stand model 11940 from K&M.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 198
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution — Share Alike
The K&M 11940 is a robust and reliable music stand. However, while it is easy to disassemble and transport, it is not very comfortable to carry. Especially when carrying for a longer time, it tends to turn around and is not easy to balance.
For this reason I designed this holder perfectly offering an easy way to lock the table:
and to carry balanced to the center of gravity:
Needed Material
- ca. 170g Filament (PETG or ASA recommended)
- 2x M5x40mm screw (ISO7380-2 recommended)
- 2x M5x50mm screw (ISO7380-2 recommended)
- 4x M5 nut
Printing
For printing the following settings are recommended for a 0.6mm nozzle. In case of 0.4mm nozzle, you may adjust, accordingly:
- Layers and perimeters
- Perimeters: 4
- Solid layers: Top: 4, Bottom: 4
- Infill
- density: 50%
- pattern: Rectilinear
- Support material
- Generate support material: yes
- Overhang threshold: 40%
Construction
Mount the handle on the folded music stand.
First keep the screws not strongly tightened. Adjust the handle to fit to the holes of the table. Then finally tighten the screws.