1 / 1
Spice Sorting Tray for 45mm Spice Glasses
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this Spice Sorting Tray for my spice glasses - maybe it's useful for you too :)
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
This is a simple Spice Tray for the kitchen with 45mm compartments. The tray is split into two parts (Front and Back) so I could print it on my Anycubic i3 Mega S with a 210 x 210 mm print bed. The parts are joined by 3mm screws and a baseplate from wood or plastic (not included). Ideally you get the baseplate cut at your local hardware store. The baseplate dimensions are 188 x 235 mm.
Required additional parts:
- 188 x 235 mm baseplate
- 6x M3 heat inserts
- 6x M3 countersunk screws
Assembly instructions
- Buy a baseplate and M3 screws that fit together with it. I chose a 5mm baseplate from wood and 10mm M3 screws.
- Place the drilling template on the baseplate and drill 4 holes into it.
- Flip the drilling template 180 degrees, drill the other 2 holes
- Countersink the holes
- Insert M3 heat inserts into the Front tray
- Insert M3 heat inserts into the Back tray
- Use M3 screws to connect the trays to the baseplate