Holder for cookware under extractor hood
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy way to hold all your cookware directly where you need it.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Using a 12mm aluminium tube, you can use this to hold all your cookware under the extraction hood.
There are 2 holders:
clamp version: will be pressed against the aluminium tube by the upper cabinets. Can be used for up to approx. 65mm thick extraction hoods
stiff version: will be mounted using a little peace of double-sided adhesive tape, in case you have no upper cabinets beside your extraction hood as I had after moving. Will work for 45mm thick extraction hoods (because there is a stop for the lower side end)
Print Settings
Rafts: Not necessary
Supports: Not necessary
Resolution: 0.4 mm
Infill: >50%