Ribbon cable routing for Sovol SV-07
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guides and clamps for the Sovol SV-07 print head ribbon cable. The cable will be routed in front of the gantry and not…
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 43
- Makes
- 0
- Views
- 286
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Guides and clamps for the Sovol SV-07 print head ribbon cable. The cable will be routed in front of the gantry and not through the gantry. This reclaims the full Z range of 252...253 mm.Note that the curtain fan wiring may need to be extended to be able to route it around the left vertical extrusion.
Print two clamps, the print head anchor, and the dust cover cable guide. The anchor and guide snap into place. The clamps are friction fit. PETG is recommended for its flexibility.
Print in the orientation shown in the screenshot.
Category: 3D Printer Parts