Chain keepers for waxed chain break in (bearings required)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to a wooden board, wall, or similar to assist with the break-in of a freshly waxed chain.
- Rating
- 0 / 5
- Likes
- 27
- Downloads
- 111
- Makes
- 0
- Views
- 1,889
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial
For those who hot-melt chain wax. This is a series of parts to make a simple chain break-in device to help loosen up the stiff links of a chain after it has been waxed. Wholly inspired by @dac_201215 (who made this), a design that was first shared on the Escape Collective member's Discord. After struggling to keep the chain on the toothed pulley wheels, I sought to make a simpler version that saw less jumping-about of a stiff-linked chain.
Each chain keeper requires 2x 608 bearings to be pressed in after the print (it's a common skateboard wheel bearing). The provided spacers are sized for M6 hardware and help to give the bearings rolling clearance – you'll need two of these per chain keeper/roller.
The photo shows two Chain Keeper wheels plus a printed pulley wheel from @dac_201215. My suggestion is to use 3 (or more) Chain Keeper wheels. The mounting method and spacing is up to you, I'd suggest going a little closer/tighter than what my image shows (mine are mounted into steel with M6 Rivnuts, so the spacing will have to do).
The chain keepers are best printed with supports due to the overhang. I printed mine in PLA, at a rough .2mm.
NOTE: I've also added an optional “Chain Keeper Spacer” file in the event you decide to mix-and-match the Chain Keeper and Pulley Wheels from @dac_201215 (as my image shows). You'll need one spacer behind the narrower Pulley Wheel (in addition to the M6 bearing spacer) to create an even chainline. Sorry, it's a lazy way to solve a simple problem.