1 / 4
MX5 / Miata ND phone holder adapter for RAM-compatible ball/mount — image 1
1 / 4

MX5 / Miata ND phone holder adapter for RAM-compatible ball/mount

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Telephone holder for MX5/Miata ND-generation, uses RAM compatible accessories

Rating
0 / 5
Likes
18
Downloads
92
Makes
0
Views
1,548
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial

BOM

You will need the following:

  • 1x RAM-compatible 1-inch ball with M6 thread, I have used one from FANAUE (Aliexpress)
  • 1x RAM-compatble phone holder with 1-inch ball, I have used FANAUE CPC-06 (Aliexpress)
  • 2x M6 hex nut
  • 1x M6 40mm screw
  • Thread-locker (Loctite or any other anaerobic glue will work)

Printing

Printed with glow in the dark PETG. Any PETG will do, PLA is probably fine too.

Base

Any % infill will do, use supports

Arm + Handle

I have used 50%, honeycomb infill for strength. Print on the outer side.

Assembly

  1. Place a nut in the base window, apply a little threadlocker and screw in the ball adapter.
  2. Insert a nut into a hole in one of the arms.
  3. Screw both arm sides together, insert phone holder head and base between arms
  4. Put in the car
  5. Profit ;-)

Thanks @PlastiBots for the base model.

Tags