Raiser stand for Model F Labs Model FSSK keyboard
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This model prints a left and a right raiser stand for the Model FSSK keyboard, which famously has no back legs.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 1
- Views
- 184
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Share Alike
Some Model F keyboards from the fledgling Model F Labs are famous for not having any leg stands that allow the owner to prop the back of the keyboard up for ergonomics.
So I solved this problem myself: here is a parametric model you can print at home, which lets you change the angle at which your keyboard sits. The printed raisers simply slide onto the sides of the keyboard. To prevent the keyboard from sliding, I recommend installing thin self-adhesive anti-slip rubber feet on the bottom of the raisers.
A parametric FreeCAD model is provided that lets you alter various parameters of the keyboard raisers. You can then export them and use the companion 3MF file (made with PrusaSlicer) to reload the re-exported parts onto the print bed (which has them on the side to avoid the need for supports). If the parts as-is work for you, then you don't need to edit the FreeCAD file at all. I have also included a pre-rendered set of raisers STLs you can import yourself into your favorite slicer. Finally, a sliced G-code file for eSUN PLA in a MK4 with a 0.6 mm nozzle is provided too.
My current generation of raisers (shown in the photos) is printed using bog-standard white PLA. Use whichever color and material you like best, but avoid using filament material that warps. Be sure your filament calibration parameters are correct, to ensure proper fitment.
Further makes and derivatives for other Model F Labs keyboards are welcome!