1 / 1
Naruto & Sasuke Rasengan
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Project: Naruto.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 29
- Makes
- 0
- Views
- 385
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
The Model is 141.78x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Blue
At layer #20 (1.68mm) swap to Orange
At layer #27(2.24mm) swap to White
At layer #28 (2.32mm) swap to Orange
If someone needs the MF3 let me know, but following the colors swaps should be fine.