Tabletop Minis Storage Racks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
miniature storage racks.
- Rating
- 5 / 5
- Likes
- 101
- Downloads
- 300
- Makes
- 4
- Views
- 2,544
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Miniature Gaming Accessories
- License
- Creative Commons — Attribution
I started working on this design after being unhappy with my previous attempt (https://www.printables.com/model/997590-warhammer-xrail-storage-system).
There were really three things that bothered me about that last iteration:
The OnShape document was… messy. Making new "shelves" was a pain. In this new version, I focused on trying to maintain as clean of a document as possible - using folders, lots of variables, etc…
The structure and the “shelves” were one-in-the-same. If you wanted to bring a stack to your table, you had to bring the whole stack - frame and all. This also meant that if I ever wanted to change the “structure”, I'd have to go and update every shelf. This new attempt separates the “shelves” from the “structure”.
The joinery - the “xrail” part - was mildly annoying to put together. While I was working on that design I wanted to challenge myself to avoid requiring any hardware, so it was successful in that regard, but I think I'd rather need to buy a handful of m3 screws than have to deal with finagling the supports.
Required Materials:
M3 Screws (20mm length works well) - 16 (or minimally 8) per stacked pair (2 screws per corner * 4 corners * 2 frames)
M3 bolts - 1 per screw (above)
Instructions:
Print 4
beamper<N>number offrameThe top-most pair of holes in the frame corners are used for the beam (e.g - the bottom most frame in a stack will have the 2 holes in each corner unused).
Naming Conventions:
Nx- there areNnumber of slots
Nmm- the diameter
oval-WmmxHmm- oval slot,Wwidth,Hheight
_- separator for multiple base slotsExample:
7x32mm_1x-oval-72mmx106mmThis rack has:
7 32mm slots
1 oval that is 72mm wide and 106mm tall
General Combinations:
Seraphon - Spearhead Box:
1x
5x-32mm-1x-oval-95mmx120mm1x
5x-32mm_3x-50mm
Skaven Units from “Skaventide” Box:
2x
20x-25mm1x
3x-50mm_3x-oval-37mmx62mm_1x-oval-46mmx72mm-mix1x
7x-32mm_1x-oval-72mmx106mm
Orruk Warclans - Spearhead Box:
1x
10x-32mm-v21x
3x-32mm_1x-40mm-1x-25mm_1x-oval-72mmx107mm_1x-oval-52mmx90mm-v2
Changelog (YYYY-MM-DD):
2025-05-26
Added
0x-hollowand0x-filledAdded
3x-65mm(w/ separate test stl/file)
2025-05-16:
Added
1x-90mmrackAdded
3x-60mmrackIncluded
test-90mmandtest-60mmfiles to tolerance checking
2025-04-11:
Added
3x40mm_9x32mmrack
2025-01-26:
Added the
3x-oval-54mmx92mmrackNote: This is a little bit lazy/hacky on my part - the dimensions here are the size I use for the “Lord-Celestant on Dracoth" from Stormcast Eternals, which is listed as a 52 x 90 oval, but that size didn't seem to fit (using the ellipse tool in OnShape). I don't think they are “perfectly elliptical bases”. I don't have the wherewithal to make a perfectly matching size.
2025-01-11:
Added a new frame with more margin in the corners for a more convenient removal of trays -
frame-v2Added trays/racks useful for the Stormcast Eternal models from “Skaventide”:
9x-40mm6x-40mm_3x-25mm_3x-32mm3x-25mm_5x-40mm_1x-oval-54mmx92mm7x-40mm_1x-oval-54mmx92mm
2025-01-02:
New 28mm rack w/ more slot space -
12x-28mm-v2New taller beam -
tall-beam32mm slots have more space:
3x-32mm_1x-40mm-1x-25mm_1x-oval-72mmx107mm_1x-oval-52mmx90mm-v210x-32mm-v25x-32mm_3x-50mm-v25x-32mm_1x-oval-95mmx120mm-v2
