F1 Spa HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Senna with the McLaren MP4/4 in Spa
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 36
- Makes
- 0
- Views
- 283
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 170.94x250mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.3mm and the Actual Depth is 2.4mm
Filaments Used:
PETG GEEETECH Black Transmission Distance: 0.3
PETG BambuLab Basic Gray Transmission Distance: 3
PETG GEEETECH Black Transmission Distance: 1
PETG GEEETECH White Transmission Distance: 5
PETG Sunlu Red Transmission Distance: 7.5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Gray
At layer #11 (0.96mm) swap to Black
At layer #14 (1.2mm) swap to White
At layer #18 (1.52mm) swap to Black
At layer #24 (2mm) swap to Red for the rest.