Doggy Poopbag holder & dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Airtight doggy-poop bag holder, with dispenser for (up to) 6cm rolls.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
This is a double-walled container for full poo-bags, with a dispenser for new ones underneath. I printed it in ABS, and after 2 months of daily use, there is still no smell once the container is closed.
The dispenser is fully separate, and will take a 60mm or 45mm wide roll.
The free revolving loop at the top allows you to secure the upper lid to the side, making it easier to use and preventing it being lost/dropped.
It requires a little assembly. I adapted the bearing to secure (glue) to a flat plate and added a loop for a tether. It then needs to be glued to the upper lid.
Remodelled in Blender V4.2
Printed in ABS on a K1 Max. 0.4mm nozzle, 0,2mm layer height. Neither lid needed print supports on K1 Max.
Huge thanks to the original model creators:
1) @HiveMindAutomation
2) @Marianne657_1401128
3) @Jerryie
