1 / 8
Cup Holder (2002 WRX)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Removable cup holder
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 325
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
We needed an extra cup holder in my WRX, so I modelled this removable version. It's mounted to the center console on the passenger side. The Backing Plate and Dovetail Mount sandwich the wall of the centre console using M5 button head caps screws and hex nuts.
The inner diameter is 89mm and the height is 90mm. It's sized to fit a short Yeti which is about the largest travel mug we own. I will design some sleeves in the future to fill in the gap when using smaller diameter mugs.
0.6mm nozzle, 0.3mm layer, PETG, Sovol SV01