1 / 1
Tasco 11TE-5 1.25" eyepiece adapter
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a screw-in adapter to use 1.25" eyepieces on the Tasco 11TE-5 telescope.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 190
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Physics & Astronomy
- License
- Creative Commons — Attribution — Noncommercial
No modifications are required on the telescope. It adds minimal focus distance so it's possible to focus to infinity with most eyepieces.
BOM
- 2 M3x5x4 heat set inserts
- 2 M3x10 socket head screws
Instructions
- Print without support with 0.1mm layers. You really need 0.1mm layers because the threads are very fine. You can use a brim if your bed adherence is low.
- Install the heat set inserts in the side holes.
- Insert the screws in the heat set inserts.
- Unscrew the original eyepiece holder (the black ring at the top of the focuser tube with two screws).
- Screw the new one and enjoy!
CAD Source
You can find the OnShape CAD source here: