3D interlocking puzzle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.52 – €7.97 net (excluding VAT)
For file: puzzle_pieces_015mm_pla_mk3s_8h0m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.25 excluding VAT (range midpoint).
- Weight reported by the author
- 75 g
- Print time reported by the author
- 8 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made this puzzle because we had a wooden version, but we lost a piece. It is composed of 18 pieces.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 60
- Makes
- 0
- Views
- 629
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution
I made this puzzle because we had a wooden version, but we lost a piece. It is composed of 18 pieces.
The design is extremely simple, but i wanted to try the animation mode in OpenSCAD. So the piece generation for printing uses 10 lines, but there are 130 lines for animating the solution.
The openscad source file is available in Thingiverse : https://www.thingiverse.com/thing:3851777
Open the file in OpenSCAD, In the customizer, choose "mode=animation", then use the animation option and set at least 200 steps.
Print instructions
Category: Puzzles Print Settings
Printer Brand: Prusa
Printer: I3 MK3S
Rafts: Doesn't Matter
Supports: No
Resolution: 0.15
Filament: - PLA
Notes:
I used a very small tolerance (parameter marge = 0.1) because my slicer made the rod just a little smaller than 1 cm. If your slicer or printer make object a little bigger you can increase the tolerance.
If you increase too much the tolerance, the puzzle will be less stable.