1 / 11
IKEA-LACK adjustable foot
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
height adjustable foot for IKEA-LACK table. Increases the table legs about 52mm, up to approx. 70mm.
- Rating
- 4.778 / 5
- Likes
- 147
- Downloads
- 659
- Makes
- 17
- Views
- 4,571
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
height adjustable foot for IKEA-LACK table. Increases the table legs about 52mm, up to approx. 70mm. Adjustment is done by threaded bolts, driven with a 36 wrench. Useful for levelling, too.
Print instructions
You will need 4 sets (Top-Part + Bolt) for one LACK table. Can be done in one print job. Takes approx. 22h, depending on your settings.
I printed this in ABS, 0,2mm layer, 10% honeycomb infill on a MK3s. Might work in PET-G as well. Supports will be needed for the Bolts.