Tripod for Mini Ball Head
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A tripod base and legs for my mini ball head.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 19
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution — Noncommercial
A mini tripod meant to accomodate a tripod head with a 3/8 inch bolt.
There are two versions of legs - a fully 3D printed one (Full-Tripod_Legs_x3.stl) and one meant to accommodate 10mm round aluminum tubes for strength (Tripod_Legs_x3.stl & Tripod_Feet_x3.stl)
The legs are attached to the base (Tripod_Base.stl) using three 5mm screws. I used lock nuts to make sure they don't unscrew over time, but regular nuts would work also (with some locktite or a dab of CA glue for security).
This mini tripod can support my dSLR with lens and flash weighing a total of 1.8kg (4 pounds).