1 / 4
6-arm Star Servo Horn
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
6-arm star servo horn for robotics and RC toys.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 145
- Makes
- 0
- Views
- 458
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Share Alike
This servo horn was designed primarily for all-metal servos such as the MG996R or the DS3218. I would recommend heating the output shaft of the servo and then press-fitting the servo horn so that the splines do not grind away the hole. Print at a finer resolution so the holes come out properly. I would recommend a .16mm or .18mm layer height.