PG7 Cable mount for Galileo2
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.51 – €1.84 net (excluding VAT)
For file: PG7_Mount_V12_0.4n_0.2mm_ASA_MK4S_1h28m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.68 excluding VAT (range midpoint).
- Weight reported by the author
- 12 g
- Print time reported by the author
- 1.47 hr
- Source material
- ASA
- Estimate material
- ASA
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
PG7 Cable Mount for Galileo 2 extruder
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 126
- Makes
- 0
- Views
- 770
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I had to design new PG7 mount for my Galileo2 Extruder on my Voron 2.4.
I have Galileo extruder with TAP and scrab brus on the end … me previous mount https://www.printables.com/model/877290-pg7-mount-for-galileo2 was working just fine until I put new build plate (bit bigger) and I had to put my printing head fe millimeters back and then PG7 mount starts colliding with the cable chain on the back …
That new mount is stil in “beta” but I think it's very very close to the point what I wanted to achieve and I'm pretty happy with the results. I moved PG7 to the side and thanks to that I saved ~20mm on the back and solved collision problems
Printing
ASA Filament
Layer height 0.20
PIF standard : 4 perimeters, 4 Top and Bottom solid layers, 30% Infill
Organic Support on build plate only