Raspberry Pi Pico W DHT22 Temperature Sensor Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.13 – €1.38 net (excluding VAT)
For file: Pico_Te_PETG_1h34m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.25 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 1.2 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a small enclosure (L: 55.9mm W: 48.9mm H: 16.1mm) houses a Raspberry Pi Pico W and a DHT22.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 106
- Makes
- 1
- Views
- 536
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This case supports a Raspberry Pi Pico W with a DHT22 in separate internal compartments. The DHT22 side has vents on the side and top to allow for airflow to enter the housing. I am using this with MQTT to HomeAssistant. I have the program using the onboard LED to tell me the status of the unit. Wall thickness will support any MicroUSB cable that you would like.