A-Frame Bracket for 2x4 "Sawhorse"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an A-Frame bracket that can be used to create a stand made from standard 2x4's.
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 141
- Makes
- 0
- Views
- 634
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is was originally designed to make a target stand utilizing standard 2x4's. My goal was to copy this design found in my hardware store: https://www.homedepot.com/p/VEVOR-A-Frame-Middle-Swing-Set-Brackets-Heavy-Duty-Carbon-Steel-Swing-Set-Hardware-DIY-Bracket-Cyan-Swing-Set-Kit-2-Pieces-QQZJ2PCSTG00H8ZGAV0/329440545?MERCH=REC-_-searchViewed-_-A-Frame-_-4-_-n/a-_-n/a-_-n/a-_-n/a-_-n/a
The openings have dimensions of 1.6in x 3.6in to allow a standard 2x4 to fit with a 0.1in tolerance (2x4's are typically 1.5in x 3.5in).
This can be used for a multitude of purposes besides being a target stand such as being a stand for spray painting. The original purpose was for a DIY swing set, however I would not trust these to support a swing. For low weight purposes, this should be perfect.
I recommend printing with at least 4 walls, and an infill of 20%. My first test is with PLA, however if you plan for this to stay outside, a more weather and UV resistant filament would be recommended.