Pipe/Tube/Straw Cleaner
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Tool for cleaning pipes/tubes or straws. Uses paper towel as a swab.
- Rating
- 0 / 5
- Likes
- 28
- Downloads
- 186
- Makes
- 0
- Views
- 661
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
These straw cleaning tools are designed to hold a paper towel at the tip, functioning as an effective swab for cleaning straws, tubes and pipes. Each tool takes less than 10g of filament and only a few minutes to print.
I included five different sizes - 4mm, 5mm, 6mm, 7mm and 8mm. If you need a larger size leave a comment and I would be happy to add it.
The stiffness of the handles can be changed depending on how many wall perimeters and/or infill % used. If you want a stiff handle use more walls & denser infill. If you want it more flexible so it can bend around curves then use fewer walls and sparse infill.
If these handles aren't long enough, take a look at another model I posted which uses filament as a handle so you can have a handle of any length! https://www.printables.com/model/1118999-pipetubestraw-cleaner-filament-handle
Print settings I used:
Layer height: 0.12mm
Wall line count: 3
Top layers: 3
Bottom layers: 3
Infill: 20% Gyroid