Betrayal at House on the Hill Token
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A token that can be printed and used for marking rooms with special conditions after a haunt begins
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 11
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Public Domain
This is a token I created to mark rooms after a haunt begins that have special conditions, such as rooms that you can perform a ritual in. I printed it in PLA with a white base and a black symbol (12) and a black base with a white symbol (4), which should accommodate all scenarios. It is 15mm in diameter and 1.6mm in depth.
Printed on a Snapmaker Artisan using both 0.2 mm Hot Ends. My best results were with the following settings:
General
- Layer Height: 0.06mm
- Speed: Slow (20 mm/s)
- Model Structure: Medium
- Support: None
- Adhesion Type: Skirt
Custom
- Initial Layer Height: 0.2mm
- Line Width: 0.2mm
- Z Seam Alignment: Random
A single token took roughly 1.5 hours, while a batch run of 12 tokens took roughly 6.5 hours.
