Ring Doorbell Wedge Mount (Pro & Pro2 WIRED ONLY)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modeled my own version with less of an aggressive angle.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 194
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Ring doorbell wedge that is paired with the original doorbell camera was too steep of an angle for my liking. Decided to model my own version with less of an aggressive angle.
THIS MODEL WILL ONLY WORK FOR (Pro & Pro2 Models WIRED ONLY)
ABS Preferred due to the potential high UV exposure & heat from the sun. (PETG if you're feeling "riskay")
Layer height: .12
Wall loops: 2 (I haven't had issues yet so, I say 2 is plenty)
Infill: 15%
Support: Yes, I used tree (auto) and a brim for safe measure.
Scale: I scaled to 101% due to not accounting for thermal expansion (The model is intended to be a snug to tight fit)