RSA Four Badge Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a badge holder that can hold 4 badges and a RSA token at the top where the token is upside down for viewing.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 37
- Makes
- 0
- Views
- 300
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
I used a Bambu Lab P1P with a printed enclosure at 50% speed. I printed this at 0.20 layer height, and there is enough friction to keep the hinge snug. If you print at 0.15, the layers could be too close, and you might not be able to operate the hinge.
I printed the design using tree supports with a 45-degree threshold angle and a top/bottom Z distance of 0.2mm. I included a version with the hinge open and closed, but personally had more reliable success with it being printed open as sometimes both sides would get fused to the RSA token holder and prevent it from opening. This does, however, cost of slightly more filament to print.
The print turned out well and the supports were easy to remove. I used ABS and even tried some PA6-CF20 for fun and both worked really well. In the photos I used Polymaker's Galaxy Black ABS.
I included the Fusion 360, Step and 3MF file for anyone to modify further if they want.