1 / 2
Replacement inner ring for Maono PD200X/XS Shock Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Printable replacement ring for the Shock Mount for the Maono PD200X/PD200SX microphone
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 180
- Makes
- 1
- Views
- 471
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Public Domain
After a mere 18 months, the inner ring on my Maono podcast mic's chock mount snapped (I suspect the cat was grooming himself against the mic). This is the replacement I made, which is a little thicker than the original, and does not use rubber pads like the original. I used an M3x12 hex screw and hex nut. You may need to modify the holes on the bracket if you use a different screw.
I printed this with PETG, 0.2mm layer height, and a 0.6mm nozzle.