1 / 2
Gardena Garden Hose Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple holder for your gardening hose (13 mm - 1/2'')
- Rating
- 4.944 / 5
- Likes
- 228
- Downloads
- 988
- Makes
- 20
- Views
- 4,529
- Reviews
- 18
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I needed to tidy up my garden hose setup and created these small and easy to print holders to screw into the house (3 or 3,5 mm screws works well).
Designed for 13 mm (1/2" in freedom units) hoses - e.g. https://www.gardena.com/int/products/watering/garden-hose/classic-hose-13-mm-1-2-15-m/967246301/
Hose “snaps” into the holder and is kept securely there. Easy to remove the hose if needed.
I've used PETG for my holders with 0.2 mm layer height and 15 % infill - 3 perimeter (using 0.6 mm nozzle). Approx. 30-35 min to print with these settings.