1 / 3
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 11
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Stand for GDEM1085Z51 1360x480 10.85inch Black,White,Red e-paper display
More information, about the hardware and software, can be found on on github.
You need two stands, one of them mirrored in the y-axis in the slicer.
Print the stands straight up, with a brim. No support needed.
Print 2 clips, on their side. No support needed.
I used PLA with a 0.2mm layer height and with a 0.4mm nozzle.
Included is the f3d file.
The enclosure for the Waveshare ESP32 POE-Ethernet board was made with this parametric model